INTAKE MANIFOLD GASKET
For Honda B16 and B18C1 Engines
Catalog #15041 & #15042
INSTALLATION INSTRUCTIONS
1. Clean all gasket mating surfaces. Stuff paper towels into the open intake ports before cleaning to prevent any debris
from entering the engine.
2. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below (See Fig. 1).
Torque all bolts to 17 ft./lbs
Fig. 1
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com
Catalog #15041 & #15042
Rev. 4/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0382
INTAKE MANIFOLD GASKET
For Honda B16 and B18C1 Engines
Catalog #15041 & #15042
INSTALLATION INSTRUCTIONS
1. Clean all gasket mating surfaces. Stuff paper towels into the open intake ports before cleaning to prevent any debris
from entering the engine.
2. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below (See Fig. 1).
Torque all bolts to 17 ft./lbs
Fig. 1
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com
Catalog #15041 & #15042
Rev. 4/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0382
|
Cobra Digital Digital Camera DC360 User Manual
Contec Computer Drive PPC HDDMSA User Manual
Cuisinart Blender CSB 77A User Manual
Cuisinart Waffle Iron WAF RC User Manual
Dimplex Indoor Fireplace CHB20BR User Manual
D Link Network Router WBR 1310 User Manual
Duracell Battery Charger IEC ANSI User Manual
EverFocus Security Camera ED560 User Manual
Frigidaire Dishwasher 154768501 User Manual
Gefen Switch EXT DPKVM 441 User Manual