Installing Your Multifunction
to Your Network for the First Time
MAXIFY MB2020
Mac OS
1
Preparing to Connect to the Network
Notes on Network Connection
• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
• In an office setup, consult your network administrator
• If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
• Place the machine and computer on the same network segment.
3
Setting up the Network Connection
Software Installation
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
Installation time varies depending on the computer environment or the number of application software to be installed.
IMPORTANT
• Log on as the administrator (or a member of the Administrators group).
• Quit all running applications before installation.
• Do not switch users during the installation process.
• Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
• If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
4
Setting up the Network Connection
To begin setup of your MAXIFY MB2020 on your wireless network, you must first download the software to your computer. Go to the
MB2000 Series Setup page , read the information and click the Download button.
After the file has downloaded successfully, double-click it to start the install procedure.
The setup instructions presented in this document describe the “Cableless Setup” method which does not require the need to know the
Access Point (network name), or network password and does not require the printer to be temporarily connected to the computer with a
USB cable.
Click Next on the first screen. If prompted, enter the Administrative Password to continue.
5
Setting up the Network Connection
Click Next on the following screen.
6
Setting up the Network Connection
Follow on-screen instructions. Select Wireless LAN Connection and click Next on the following screen.
7
Setting up the Network Connection
Follow on-screen instructions. Select Access Point Connection and click Next on the following screen.
8
Setting up the Network Connection
Continue following on-screen instructions. On the Printers on Network List, check the Setting printer could not be found on the list
checkbox and click Next.
9
Setting up the Network Connection
Continue to follow on-screen instructions.
Follow the instructions on the Printer Setup screens (1-1 and 1-2) to select Wireless LAN setup.
10
Setting up the Network Connection
Continue to follow on-screen instructions.
Select Other Methods on the Setup Procedure Selection screen (2-1).
*Note: If your printer’s display looks like the
screen shown above Push Button Method in
the Setup Procedure Selection screen (2-1),
press the Stop button before proceeding to the
next instruction
11
Setting up the Network Connection
Continue to follow on-screen instructions.
Select Other setup on the Setup Procedure Selection screen (2-2) and Cableless setup on the Setup Procedure Selection screen (2-3).
12
Setting up the Network Connection
Continue to follow on-screen instructions.
Select Other setup and Cableless setup on the Connection via Cableless setup screens (3-1 and 3-2).
13
Setting up the Network Connection
Continue to follow on-screen instructions.
Press the OK button on the printer when “Follow the instructions on the computer or Smartphone….” appears, then click Next on the
Connection via Cableless setup screen (3-3).
14
Setting up the Network Connection
Click Next on the Connection Completed screen.
15
Installing the Drivers & Software
Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next.
*MP Drivers and Canon IJ Network Tool are required and cannot be deselected. We recommend installing Quick Toolbox and IJ Scan
Utility2 to take full advantage of the printer’s features.
16
Adding the Printer
Continue following the on-screen instructions.
When the Add Printer screen appears, click Add Printer.
17
Adding the Printer
Select the Canon MB2000 series with Canon IJ Network listed in the Kind column, then click Add.
18
Adding the Printer
Click Next on the Add Printer screen.
19
Completing the Setup
Continue following on-screen instructions.
When the Setup Complete screen appears, click Next.
At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit
the setup program.
20
|
Beko Washer WMB71642S User Manual
Black Box Modem MD1640A User Manual
Black Decker Drill VPX1201 User Manual
Blanco Indoor Furnishings 157 138 User Manual
Blanco Indoor Furnishings 501 104 User Manual
BOB Stroller MA0501A User Manual
Bradford White Corp Water Heater 500 B User Manual
Briggs Stratton Pressure Washer 20306 User Manual
Bush Hog Lawn Mower HM2007 User Manual
Chief Manufacturing Indoor Furnishings FSA 1004 User Manual