Shiro Telephone SC3130 User Manual

User Manual •  
SC3130  
Caller ID Phone  
 
SC3130 User Guide  
TABLE OF CONTENT  
PRODUCT OVERVIEW.....................................................................................3  
1. INSTALLING OR REPLACING THE BATTERY .........................................................4  
2. SWITCH OPERATION...................................................................................4  
IDD LOCK switch.......................................................................................4  
3. SOFTWARE SETTING ..................................................................................4  
4. FUNCTION KEY OPERATION ..........................................................................6  
UP/- key and DOWN/+ key...........................................................................6  
OUT/x key..............................................................................................6  
DEL key .................................................................................................6  
CAL key .................................................................................................6  
PAUSE/VIP key .........................................................................................6  
BRIGHT/÷ key..........................................................................................6  
RING/HOLD key........................................................................................6  
FLASH key (600ms)....................................................................................7  
REDIAL/BACK key......................................................................................7  
HF (HANDSFREE) key..................................................................................7  
5. ADDITIONAL NOTES ...................................................................................7  
INCOMING CALL LCD INDICATOR.....................................................................7  
LCD BACKLIGHT FUNCTION ..........................................................................7  
TROUBLESHOOTING GUIDE..............................................................................7  
DECLARATION OF CONFORMITY ........................................................................8  
2
 
SC3130 User Guide  
PRODUCT OVERVIEW  
18 19  
20  
17  
16  
15  
14  
1
2
3
4
13  
5
6
7
8
9
12 11 10  
Description:  
1. LCD Display  
2. DOWN/+ key  
3. DEL key  
16. OUT/x key  
17. UP/- key  
18. TEL LINE jack  
19. TEL LINE jack  
20. LOCK switch  
4. RING/HOLD key  
5. SET key  
6. BRIGHT/÷ key  
7. FLASH key  
8. REDIAL/BACK key  
9. HF (HANDSFREE) key  
10. #/= key  
11. 0-9 key  
12. */. key  
13. Handset Cord jack  
14. CAL key  
15. PAUSE/VIP key  
3
 
SC3130 User Guide  
1. INSTALLING OR REPLACING THE BATTERY  
Install 3 Alkaline AA batteries into the battery compartment and re-fit the cover before use.  
IMPORTANT—before removing the battery compartment cover, ensure the base unit  
is disconnected from the telephone line.  
Connection and conditions for use  
You can connect your SC3130, to public networks in the United Kingdom or to an  
approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax  
machines, etc.) has a ringer equivalence numbers (REN). The RENs of all  
equipment connected to an exchange line must not add up to more than 4  
otherwise, one or more phones may not ring and/or answer calls correctly.  
SC3130 has a REN of 1, and most other telephones have a REN of 1 unless marked  
otherwise.  
2. SWITCH OPERATION  
IDD LOCK switch  
Use the keys provided in the package. The telephone allows all outgoing number if the key is  
on red point. It cannot dial outgoing number starting with digit 0 when the key is on green  
point.  
3. SOFTWARE SETTING  
In on-hook mode, press SET key to enter menu setting, the phone LCD will display SET 1  
DATE, press UP/- or DOWN/+ key to select different options. Press SET key again to confirm.  
Use UP/- or DOWN/+ key to select the mode you need. After completing the setting, press  
SET key to go to the next item. To exit menu, press DEL key.  
By pressing SET key (under the on-hook mode), you can select the following:  
SET ITEM  
OPERATIONS  
DATE/TIME  
LCD panel displays SET 1 DATE, press SET key to enter this mode. The  
year value would flash, use UP/- or DOWN/+ key to select value, then  
press SET key to move to next item.  
4
 
SC3130 User Guide  
AREA CODE  
PABX CODE  
AUTO-IP  
LCD panel display SET 2 CODE, press SET key to confirm, LCD display  
CODE, press SET key to enter this mode. Use UP/- or DOWN/+ key to  
select value, then press SET key to move to next item.  
Area Code can be used to filter the number for incoming calls. E.g.  
Area code = 75 when there is incoming call with 75 6554556, it will be  
displayed as 655 4556 only.  
LCD panel display SET 3 PCODE, press SET key to enter this mode. LCD  
displays PCODE, use UP/- or DOWN/+ key to select value, then press  
SET key to move to next item.  
Once the value is set, e.g. 9, the telephone will pause 2 seconds for  
any telephone number that begins with 9. Then it will continue the rest  
of the numbers.  
LCD display SET 4 AUTO IP, press SET key to enter this mode. LCD  
display AUTO IP OFF and OFF will flashes, use UP/- or DOWN/+ key to  
select value. When LCD displays AUTO IP ON, press SET key. Then the  
LCD will display INPUT CODE for you to enter the IP numbers. Use DEL  
key to correct any wrong input. After entered all IP number, press SET  
key to enter into next item. The outgoing call will automatically use IP  
mode.  
After you have set a number on Auto IP, e.g. 1455. If you need to call  
any number that starts with 14550, just type 0 to represent 1455 then  
follow by the subsequent numbers. To illustrate:  
1. Press 0 288888 follow by REDIAL button  
2. The telephone will call out 1455 0 288888.  
P/T MODE  
LCD display SET 5 P-T, press SET key to enter this mode. LCD display  
TONE. Use UP/- or DOWN/+ key to change it into PULSE, press SET key  
to move to next item.  
ANTI SHARE  
LCD display SET 6 ALAr, press SET key to enter this mode. LCD display  
STEAL OFF. Use UP/- or DOWN/+ key to change it into ON, press SET  
key to move to next item.  
The Anti Share feature is to ensure other telephone is unable to share  
the same line as your telephone. If another telephone is sharing the  
same line, there will be constant noise when it is off hook.  
ALARM  
LCD display SET 7 ALERT, press SET key to enter this mode. LCD  
display 1 00-00 OFF. Press SET to navigate on the HOUR/MINUTE. Use  
the UP/- or DOWN/+ key to change the values. Change OFF to ON to  
enable the alarm function. You can set up to 3 alarms and the  
telephone will ring at the time set.  
5
 
SC3130 User Guide  
4. FUNCTION KEY OPERATION  
UP/- key and DOWN/+ key  
In any mode, press either key to check all the incoming numbers. If there is no incoming  
number, the unit will display END. The unit can receive up to 16-digit phone numbers.  
OUT/x key  
In any mode, press OUT key to check the outgoing numbers with time. Use UP/- or DOWN/+  
key to select the outgoing number. Press BACK key to dial the selected number.  
DEL key  
In any mode, when checking the incoming and outgoing call, press DEL key to delete the  
number you are checking. Press and hold DEL key for 4 sec and it will delete all incoming call  
or outgoing call numbers. When you pre-dial, press DEL key to delete digit one by one.  
CAL key  
You can use the calculator function to perform addition, subtraction, multiplication and  
division. Press the CAL key to go into calculator mode. Press the first number follow by UP/-  
(minus)/ DOWN/+ (plus)/ OUT/x (multiply)/ BRIGHT/÷ (divide) key and the second number.  
Press #/= (result) key to see the calculated value. To reset the values, press CAL key again.  
If you need to insert decimal point, press the */. key. The LCD can only display result up to 10  
digits. To exit this mode, press DEL key.  
PAUSE/VIP key  
In the on-hook mode, pre-dial the number then press PAUSE key to add a 3.6 seconds pause  
before dialing the rest of the numbers. To call out, press REDIAL/BACK key.  
For the VIP function:  
A) Press VIP key to add and cancel VIP calls when you check incoming and outgoing call.  
VIP number is marked with a lock on the LCD.  
B) VIP number cannot be deleted individually. To delete all the VIP numbers, press and  
hold the DEL key for 4 seconds.  
C) If you have a new incoming call and the VIP memory is full, it will replace the normal  
and VIP number.  
The unit will use VIP ring tone if the incoming call is a VIP number.  
BRIGHT/÷ key  
To adjust the contrast of the LCD, press the BRIGHT/÷ key to adjust from Level 1-5.  
RING/HOLD key  
In the on-hook mode, press RING key, the phone LCD will display RING 1-8, which means  
there are eight selectable ringing tones. Select your preferred ringing tone by pressing RING  
continuously.  
In off-hook mode, press RING/HOLD key to activate music on hold. To disable, press the  
6
 
SC3130 User Guide  
RING/HOLD key again.  
FLASH key (600ms)  
In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press  
REDIAL key or dial out another number.  
REDIAL/BACK key  
In the on-hook mode, pre-dial the number then press REDIAL/BACK key to auto pick up and  
dial out the number. In the off-hook mode, press this key to redial the last dialed number.  
When checking the incoming number or outgoing number, press REDIAL/BACK key to auto  
pick up and dial out the number directly.  
HF (HANDSFREE) key  
While on-hook, press the HF key to go into handsfree mode. You can talk through the  
microphone and listen from the speakerphone without lifting the handset. While off-hook,  
press the HF key and put down the handset to go into handsfree mode.  
5. ADDITIONAL NOTES  
INCOMING CALL LCD INDICATOR  
When there is incoming call, the unit will be automatically display the caller number, date  
and time, and also display its serial number. If the incoming call is in private mode, it will  
display “__p__”; it will display “__0__” if exchange cannot determine the number; it will  
display “—E—“ if the call signal contains error.  
LCD BACKLIGHT FUNCTION  
When there is incoming call or handset is off-hook, the LCD backlight will lit up. It will be on  
for about 6 seconds before going off. Without batteries, LCD backlight will not lit up at all.  
TROUBLESHOOTING GUIDE  
(Q) I do not hear any dial tone from the handset.  
(A) Ensure the handset cord is connected correctly from the handset to the handset cord jack  
at the base. Ensure you have plug in the telephone cable from the telephone to the wall  
socket correctly. If the problem persists, please check with your local dealer.  
(Q) I could not see the caller’s number on the LCD when there is incoming call.  
(A) Ensure that you have subscribed Caller ID service from your local telecom provider.  
(Q) There is no LCD Display / Backlight after I have connected the telephone line. I can  
call out normally.  
(A) Ensure that you have inserted the batteries on the battery compartment. If there is still  
no display, change the batteries and ensure it is not empty. If the problem persists, please  
7
 
SC3130 User Guide  
check with your local dealer.  
(Q) I cannot hear the VIP ringing tone when there is a VIP incoming call.  
(A) Ensure that you have inserted the batteries on the battery compartment. If there is still  
no VIP ringing tone, change the batteries and ensure it is not empty. If the problem persists,  
please check with your local dealer.  
DECLARATION OF CONFORMITY  
The telephone complies with the essential protective requirements and objectives of:  
EC R& TTE Directive 1999/5/EC  
EC Low Voltage Directive 73/23/EEC  
EC EMC Directive 89/336/EEC  
And conforms to the following relevant harmonized standards:  
EMC: EN55022, EN55024  
Safety: EN 60950  
Created on 28th October 2005. SC3130 Caller ID Phone.  
Please visit us at www.shirocorp.com.  
8
 

Sharp Microwave Oven R 220F User Manual
Shindaiwa Blower 68915 94310 User Manual
SMSC Network Card USB2601 User Manual
Sony CD Player CDX 848X User Manual
Sony Clock Radio ICF C275RC User Manual
Sony Ericsson VCR NSP 1 User Manual
Sony Projection Television KF 50SX100HK User Manual
StarTechcom Network Router SV831DUSBAU User Manual
Stoelting Freezer SO328 User Manual
Tanita Scale BF 626W User Manual